AVAYESYMPHONY

APERTURA SENSA
FLOORSTANDING SPEAKERS

Our wish, when developing SENSA & SWING was to create small-size speakers that could fit in any limited interiors.

The new shape we developed combines an original design, simple and elegant while maintaining an optimal load volume.SENSA is ARMONIA’s Worthy descendant.

They share the same main features and concern for perfection inherent to the Apertura brand.

APERTURA SENSA Inventive Speaker
DRIVE UNITS
DRIVE UNITS

A 16cm mid/woofer with an « isotactic matrix », cone like in Armonia, Edena and their big sisters. This material made of woven polypropylene strips, combines stiffness, lightness and good damping properties.

The long moving coil allows a long linear excursion. Which is quite amazing for a speaker of this size.

This drive unit comes also with an original suspension, featuring radial stiffeners that lower the interferences.

High frequencies are reproduced by a tweeter, member of the famous “Ring Radiator” family.

In addition to its unusual profile, it has a bullet shape waveguide and a rear damping chamber. The result is an extended frequency response, both at the top end (to above 40kHz), and at the bottom end to allow easier coupling with the bass/mid range drive unit.

CROSSOVER

CROSSOVER

Proprietary « DRIM » structure with a triple attenuation slopes

This technology cancels intermodulation on each sections of the crossover, which result in unsurpassed Clarity and finesse

Optimized crossover structure to avoid magnetic interference between components

ENCLOSURE

ENCLOSURE

The main goal, in this new cabinet design, was to limit vibration propagation on the most critical panels (especially on the back panel).

High thickness panels (18mm)

Internal multi-cavity framework with 3 bracing panels to stiffen the structure and create very specific areas where damping materials can be applied

Bass reflex loading with an optimized double resonator. This specific configuration allows deeper low frequencies reproduction.

Importance is given to damping treatment to cancel any standing waves. We are using 2 different types of dumping materials.

3 differents standard finishes available :

  • Satin : light oak, american walnut
  • High Gloss : white, piano black
SPECIFICATIONS
Frequency range 32-30 000Hz/ +-3dB
Sensitivity 93dB/2,83v/1m
Impedance 4 Ω
LoadHybride => Bass-Reflex / Acoustic line
Drive units2 x 18 cm Isotactic Matrix cone Bass/Mid range unit, 15 x 145 cm ribbon tweeter
Crossover frequency1,8kHz, “DRIM structure” : 2 separate circuit boards for high and low frequencies
Terminalssingle wire binding posts (bananas or spades)
Dimensions (W x D x H)220 x 353 x 1150 mm (W x D x H), with metal stands : 360 x 391 x 1211 mm
Weight52 kg net – 61 kg shipping weight
logo Award hifi test

>>Best of Hifi Test SENSA
Download
Apertura Guide (English)