iDefender+
ENHANCERS
iFi

Beat the buzz

Is your audio still plagued by hum and buzz?

Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion.

• Ground LoopsIn an electrical system, a Ground or Earth loop occurs when two points of an audio system both have a ground reference which causes a ‘potential voltage difference’ between them. Ground loops are a major cause of the noise, hum, and interference in audio, video, and computer systems.

Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need.

Take a look at our Noisebusting Tech Note here.

Break the loop

When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem.

It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast.

Using a USB DAC?

Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery?

Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply.

If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved.