FEATURES AND BENEFITS

High performance low density polyethylene dielectric Cuts down on the amount of audio signal energy lost due to cable capacitance

X-Tube™ Technology

At low frequencies both X-tubeTM and conventional stranded/solid core speaker cable convey signals in a linear way. However, at higher frequencies, X-tubeTM retains a near-linear signal transfer, whereas the conventional stranded/solid core cable fails to conduct higher frequencies uniformly across the entire conductor area. The result is greater detail which would other wise be lost in ordinary cables.

Bi-Wire

Separate feed to tweeter and bass/mid drive units for improved loudspeaker control and performance

X-TUBE TECHNOLOGY

At low frequencies both X-tubeTM and conventional stranded/solid core speaker cable signals in a linear way. however, at higher frequencies, X-tubeTM retains a near-linear signal transfer, whereas the conventional stranded/solid core cable fails to conduct higher frequencies uniformly across the entire conductor area.

The effect of this is to reduce the actual cross sectional area of the cable at 15khz to less than 75% of that at low frequencies. The result induces distortion and compromises the performance of the cable.

In standard speaker cables the high frequency current density occurs at the periphery with and rapidly deteriorating current density towards the centre of the conductor.

X-tubeTM with polycore technology exhibits much lower selfi nductance and is therefore less affected by this problem. The polycore tube reduces loop inductance to levels only achievable using more costly and difficult to terminate cables.