IFi Pro iCAN Studio

Produce Sound. Hear Music.

The Pro iCAN Studio is the flagship reference-class headphone amp and monitor controller.

When the best is your only acceptable quality level for mixing or mastering and you need to rely on headphones for your work, or use active nearfields, this flexible and no compromise design is the only serious solution worth considering.

Overview Specs

52x more power. Pump up the volume. Banner

Pro iCAN Studio

One balanced and three single-ended input connections
Balanced and single ended pre-amp outputs for active monitors
4.4mm Balanced output, fully balanced XLR, a single-ended 6.3mm and the iFi Studio unique S-Balanced 3.5mm output
Switchable separate J-FET or tube (2x GE5670) output stage

Know. No Fear.

Connect any headphones you choose. From the most sensitive custom IEMs to the most difficult to drive headphones you can find, its switched variable gain ensures the perfect match.

And its XBass active EQ circuit allows you to compensate for the lack of bass in some headphones – particularly open-backed models.

XBass EQ is an elegant solution which outperforms traditional bass correction, thanks to its mix of active and passive components and carefully designed response curve that maintains precision.

Trust in the absolute authenticity of what you are hearing to ensure the mixes and mastering reflect your creative output without detraction.

Stacked. With Tech.

The Pro iCAN Studio uses a top-quality custom OV Op-amp in its fully differential balanced circuit design, to deliver ultra low distortion. The result is minimal interference and crosstalk.

Its balanced power output of more than 14,000mW in balanced mode and over 4,800mW in single-ended, unbalanced, provides all the drive required.

The iFi Studio exclusive S-Balanced technology It delivers the maximum performance from both single-ended and balanced headphones. The S-Balanced (single-ended compatible balanced) 3.5mm headphone output delivers the benefits of the balanced connection to single-ended headphones.

It can output more than 11.5V in Single-Ended mode and 23V in Balanced-mode.

Control. Or Live.

The Pro iCAN Studio is equally at home in either the control room or live room, with ‘phones or nearfields.

Monitor your recordings during mixing and mastering using headphones and the high-quality amplifiers in the Pro iCAN Studio, to give you absolute confidence that what you hear is a totally accurate portrayal of your work.

Hook it up to your preferred active monitors to control them with precision and switch between inputs and this versatile amp proves itself to be adaptable and expandable. Go even further by combining it with the Pro iDSD Studio converter to create an unrivalled interface solution.

Use it for musician monitoring in a live room situation to give far higher quality than is usually offered during recording sessions.

Headphone outputs
Gain (user-selectable)	0dB, 9dB and 18dB
XLR 3-pin XLR 4-pin 6.3mm 6.3mm BAL 4.4mm SE 3.5mm	Balanced separate left and right sockets Balanced stereo SE stereo positive phase SE stereo inverted phase Built-in IEMatch -18dB Built-in IEMatch -14dB
Frequency Response	0.5Hz to 500kHz(-3dB)
THD & N
Balanced
Solid-State Tube Tube+	0.0015% 0.002% 0.012%
Single- Ended
Solid-State Tube Tube+	0.005% 0.005% 0.2%
SNR
Balanced Single-Ended	>147dB(A) >137dB(A)
Output Power
Balanced Single-Ended	>14,000mW (@ 16) >4,800mW (@ 16)
Output Voltage
Balanced Single-Ended	>23V (@ 600) >11.5v (@ 600)
Input voltage (Pro iDSD Signature)	DC 9V/6.7A – 18V/3.35A
Input voltage (iPower Elite)	AC 85 – 265V, 50/60Hz
Power consumption	<22W idle, 50W max
Dimensions	213 x 193 x 63 mm
Net weight	1.93 kg